greek_languageenglish_language
       
 
Installation Instructions

 

To extract rotate and in the same time pull out.

1. Cut the power off.
2. Turn the button all the way to the left side and rotate it while pulling it outwards, till it is extracted.
In the case of Dimmer Type 400, the extraction in done by simply pulling the button out.
3. Unscrew the nut and take the plate out.
4. Connect the conductors to the sockets.
5. Place the rheostat in the junction box, using either the claws or the screws if the junction box allows it.
6. Place and screw the plate.
7. Press gently the key downwards.
8. Put the power back on and check the dimmer's functions.

 
 
 

Manufacture Standards

Low Voltage Directive LVD 73/23/ΕU ΕΝ 60669-1, EN 60669 - 2 - 1

Electromagnetic compatibility Directive 89/336/ΕU

EN 55015, ΕΝ 61547, IEC 1000 - 4 - 2, IEC 1000 - 4 - 3, IEC 1000 - 4 - 4, IEC 1000 -4 - 5, IEC 1000 - 4 - 6, IEC 1000 - 4 - 11


•Century Control Dimmers are CE Marked

 
dimmer_certificates
© ARTNOISE Adv

   

___________________________________________________________________________________________________________________________________________________________________________
About usProductsNewsDownloadsCatalogueContact Us . ....... .... ...... ....... .. ............ ...... ...... ........ .. .... ... .... ... .... . . .... ... . .. ... ... . . .... . . . ... ... ... ... ©Art Noise Communication