greek_languageenglish_language
       
 
SAT Series Specifications - Installation

Technical Specifications

Operating Voltage: 230 VAC ± 15% 50 / 60 Hz

Consumption :
2 VA

Operating Temperature : -10OC ® +60οC

Storage Temperature : -25οC ® +80οC

Adjustable Time Delay :
0 ® 5 min (linear)

Maximum Current : 10Α ( ~ 2000 W recommended)

Contact Type : Gold-filled Silver

Mechanical Strength : 10.000.000 switching operation

Status Indications : red led for active output relay

Installed on 35 cm rail and occupies space equal to one 17,5 mm distribution board modules

Reliable operation with up to 30 illuminated inductive light button

Installation Instructions :

1) Cut off the power
2) Strip the cables (cross-section 2,5 mm max) up to 0,7mm.
3) Connect the cables as shown on wiring diagrams.
4)In case of selection button on the automatic staircase, set it to normal mode
5) Place the automatic staircase on the rail.
6) Give power, set the time delay and check the function using the button.

Notification :
If after an outage the mode selection switch is in continuous mode, you need to set it to normal mode in order to return to its previous mode.
 
 
 
Manufacturing standards
DIN EN 60669-1
(VDE 0632 Teil 1) 1995-04,
DIN EN 60669-1 A2
(VDE 0632 Teil 1/A2) 1997-04,
EN 60669 - 1 1995,
EN 60669 -1/A2 1996.

Tested by the German certification body VDE.
Certified with CB & CCA.
dimmer_certificates
© ARTNOISE Adv
 
   

___________________________________________________________________________________________________________________________________________________________________________
About usProductsNewsDownloadsCatalogueContact Us . ....... .... ...... ....... .. ............ ...... ...... ........ .. .... ... .... ... .... . . .... ... . .. ... ... . . .... . . . ... ... ... ... ©Art Noise Communication