Century Control’s Rail Dimmers Type - R, consist of 4 types of regulators, with every type proper for a certain type of load. During the regulation, the consumed power of the load is changed, thus saving energy.

INSTALLATION: Installed on 35 cm rail and occupies space equal to 4 17,5 mm distribution board modules.
In case of multiple dimmers installation in the same distribution board, there must be left a 2-3 cm space from each other and should in no case be adjacent to each other.Finally, it is recommended to use external distribution boards with vent-holes or ventilation ports on top and bottom side. The heat distribution via natural air circulation will expand the life span of the electronic parts of the distribution board.

ATTENTION:
Α. Make sure that controlled load is inside the load limitations (min-max ) of the dimmer's spesifications.

B. Use of wrong type fuse will destroy the dimmer during a short-circuit.

C. Use rail switch for dimmer power supply.

D. Especially in the case of the 960R, the use of even medium quality transformers will lead to shift of the minimum load upwards.